Config Router básico 1 21072012

Embed Size (px)

Citation preview

  • 8/16/2019 Config Router básico 1 21072012

    1/2

      --- System Configuration Dialog ---

    Continue with configuration dialog? [yes/no]: no

    Press RETURN to get started!

    Router>Router>Router>Router>enableRouter#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname R1R1(config)#interface fastethernet 0/0R1(config-if)#ip address 192.168.10.254 255.255.255.0R1(config-if)#no shutdown

    %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

    R1(config-if)#exitR1(config)#interface fastethernet 0/1R1(config-if)#ip address 192.168.20.254 255.255.255.0R1(config-if)#no shutdown

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    R1(config-if)#

    R1 con0 is now available

    R1>enable

    R1#configure terminalEnter configuration commands, one per line. End with CNTL/Z.R1(config)#line vty 0 4R1(config-line)#password slayer2504R1(config-line)#loginR1(config-line)#R1(config-line)#R1(config-line)#R1(config-line)#exitR1(config)#enable password vicky

  • 8/16/2019 Config Router básico 1 21072012

    2/2

    R1(config)#R1(config)#R1(config)#R1(config)#R1#%SYS-5-CONFIG_I: Configured from console by console

    R1#R1#R1#

    Press RETURN to get started.